gear teeth
英 [ɡɪə(r) tiːθ]
美 [ɡɪr tiːθ]
网络 轮齿; 齿轮齿; 齿数; 齿轮齿数; 齿轮
双语例句
- Just like with spur gears, the solution to this problem is to curve the gear teeth.
就像直齿轮一样，这个问题的解决也是将轮齿变为曲线。 - Straight-cut gear burnishing of gear teeth
直齿圆柱齿轮，正齿齿轮 - Gears Wear and damage to gear teeth Terminology
GB/T3481-1997齿轮轮齿磨损和损伤术语 - Contact Zone Simulation Analysis of Spiral Bevel Gear Teeth Faces in Heavy Load Transmission
重载弧齿锥齿轮齿面接触区仿真分析 - According to Hertzian stress, the stiffness during the contact of a pair of gear teeth is derived, and the variation of stiffness is introduced into the rack-and-pinion meshing model.
以赫兹应力推导齿对啮合刚度，并将刚度变化加入齿条-齿轮啮合模式中； - Calculation on deformation of spur gear teeth based on precise model of teeth profile
基于精确齿廓模型的直齿轮轮齿变形数值计算 - In the process of automobile engine gear, the scheme of gear blank processing and the determination of the gear shaving parameter are the main factors that affects the gear teeth processing.
在汽车发动机齿轮的加工工艺中，齿坯加工方案和齿轮剃齿参数的确定，直接影响齿轮齿形加工的主要因素。 - If possible, use the same lubricant for the raceway system and the gear teeth as used for initial operation.
如可能，使用与第一次润滑相同的润滑剂来润滑轴承座圈和齿轮齿条。 - Application of Roll Crusher with Four Gear Teeth in CFB Units
四齿辊式破碎机在循环流化床机组中的应用 - Check ring gear and pinion gear teeth contact pattern.
检查环形齿轮齿接触印痕。 - Gear teeth are nitrided for exceptional hardness and improved wear resistance even at high speed.
轮齿经过渗氮处理，具有极高的硬度，并且即使在高速也能改善耐磨性。 - The test of Pb samples indicates that the die set works smoothly and gear teeth are filled fully.
根据铅试样模拟实验表明，模具装置工作顺畅，齿轮成形饱满。 - The contacting surfaces of gear teeth must be aligned in such a way that the drive is positive; i.e., the load transmitted must not depend on frictional contact.
齿轮的接触面必须以一定的方向排齐，这样可以使得传动是正向的，也就是传递的载荷不必依靠表面的摩擦作用进行传递。 - The essential elements in a roller-chain drive are a chain with side plates, pins, bushings ( sleeves), and rollers, and two or more sprocket wheels with teeth that look like gear teeth.
滚柱链条传动的基本组成部分有侧板、销轴、套筒、滚柱、两个或多个链轮，每个链轮上有类似齿轮形状的齿。 - Milling can produce flat or angled surfaces, groves, slots, gear teeth, and other profiles, depending on the shape of the cutters being used.
铣削可根据所用的铣刀形状分别加工平面或斜面、槽口、缝、齿轮齿及其它型面。 - Burnishing of gear teeth spiral bevel milling cutter head sharpening machine
（齿轮的）轮齿研磨螺旋锥齿轮铣刀盘刃磨床 - Study on Parametric Gear Teeth Profile Generating and Realization Method
参数化齿轮全齿廓自动生成及实现方法 - Gear coupling is the same number of teeth and the inner ring gear teeth of the flange half-band coupling and other parts.
齿式联轴器是由齿数相同的内齿圈和带外齿的凸缘半联轴器等零件组成。 - A hinged or pivoted device adapted to fit into a notch of a ratchet wheel to impart forward motion or prevent backward motion. burnishing of gear teeth
掣爪，棘爪一种枢轴或转轴器械，能与齿轮缺口或齿间吻合来前进或防止后移 - Gears using two gear teeth meshing with each other to transmit power and motion of the mechanical transmission, with the main, driven wheel gear direct, transmit motion and power of the device.
齿轮传动装置利用两齿轮的轮齿相互啮合传递动力和运动的机械传动，用主、从动轮轮齿直接、传递运动和动力的装置。 - Research of the Adaptability of Chamfering Hob to the Number of Cylindrical Gear Teeth
圆柱齿轮倒角滚刀对齿轮齿数的适应范围研究 - And discuss the bending strength of gear teeth.
分析了轮齿的弯曲强度。 - The Error Analysis of plane Gear Teeth and the Involute Gear Teeth
平面齿和渐开线齿形状误差分析 - This paper discusses the profile curves of gear teeth and the gearing theory by the method of tangential coordinates.
本文用切线座标法研究齿形曲线及啮合理论。 - A new method is proposed for analysing the meshing force exerted between the pin teeth and the cycloidal gear teeth in the course of the cycloidal pin gear epicyclic transmission.
提出了一种分析摆线针轮行星传动中针齿与摆线轮齿间啮合力的新方法。 - The gear teeth and meshing line are distorted in the meshing process as a result of wearing and rise in temperature.
实际应用中，由于磨损和受热等原因，使得齿轮齿廓以及啮合过程中啮合线都发生了畸变。 - An approach to calculate the bending stress course on root fillet of gear teeth was presented.
提出了一套计算齿轮齿根弯曲应力过程的方法。 - This paper introduces the concept of nondimensional gear teeth to be used in gear stress minimization problems.
本文介绍了无因次齿轮轮齿的概念，用以使齿轮应力为最小的问题。 - A model of calculating load distributions, transmission error and bending stress of root fillet of gear teeth has been studied and discussed.
文中对圆柱齿轮传动的载荷分配、静态传动误差及齿根弯曲应力的分析模型和计算方法做了研究和探讨。 - Influence on shaving errors by deformation of cutter teeth and gear teeth
刀齿与轮齿变形对剃齿误差的影响